Importing a SketchUp File

The Import SketchUp command allows architectural drawings created in SketchUp® (versions 4 and above) to be imported into VectorWorks. SketchUp component instances are imported as 3D symbols, and geometry can be designated as walls, roof faces, and floors. After importing, refine the design using VectorWorks editing tools, or replace imported 3D symbols with VectorWorks 3D symbols.

Flexible import options allow either automatic conversion of architectural elements based on their orientation, or allow geometry conversion to be mapped to specific SketchUp materials or layers.

SketchUp import is intended for architectural geometry. Use the Import DXF/DWG command rather than the Import SketchUp command to import polygonal geometry.

Consider the following points when importing from SketchUp to VectorWorks.

Hidden SketchUp geometry is placed on the SketchUpHidden layer in VectorWorks and the layer is set to invisible by default.

A component which creates an opening is imported as a VectorWorks window or door, if attached to an object imported as a VectorWorks wall. If the component touches the baseline of the wall it is considered to be a door; if it does not touch the baseline of the wall, it is considered to be a window.

Groups and components are always imported as plain polygons in a symbol and do not generate any architectural elements such as walls or floors.

Walls are unjoined upon import, and may need to be rejoined in VectorWorks.

To import a SketchUp file:

1.	Select File > Import > Import SketchUp.

The Import Settings dialog box opens, for specifying mapping parameters to use during import. Set the default thickness of imported geometry using the parameters on the Default Styles tab.

 

Parameter	Description
Wall Thickness	Enter the thickness to assign to wall geometry during import; this value must be greater than zero
Floor Thickness	Enter the thickness to assign to floors during import
Roof Face Thickness	Enter the thickness to assign to roof faces during import

2.	Click the Geometry Mapping tab to specify the type of VectorWorks geometry to create for each imported SketchUp element. Specify None when mapping is unnecessary, as for non-architectural SketchUp drawings.

 

Parameter	Description
None	Does not map SketchUp geometry to VectorWorks geometry; all geometry becomes 3D polygons in VectorWorks
Plain Geometry	Maps SketchUp geometry to VectorWorks geometry based on the geometric orientation; VectorWorks converts vertical faces to walls, horizontal faces to floors, and non-horizontal or non-vertical geometry to roof faces
Material	Maps SketchUp geometry to VectorWorks geometry based on the material assigned to the geometry
Layer	Maps SketchUp geometry to VectorWorks geometry based on the geometry layer; geometry from imported layers is retained on the correct layers after import

3.	If no mapping or the plain geometry method is selected, click OK to select the file and begin the import (skip to Step 9).

4.	If material or layer geometry mapping is selected, the Geometry Mapping tab displays mapping import criteria. The mapping options are identical for both material and layers, except for the column heading indicating the type of element being mapped.

5.	Click Import from to open the Import SketchUp Model dialog box. Select the SketchUp file from which to derive the mapping criteria for the material or layer list, and click Open. The list of available materials or layers displays in the Import Settings dialog box.

6.	For each material or layer, specify how to convert to the VectorWorks equivalent. (For example, convert all geometry with a shingle material to a roof face, or all geometry on a roof layer to roof faces.)

Double-click a material or layer from the list to open the Select Geometry dialog box.

7.

In the Select Geometry dialog box, select whether to import the material or layer as geometry based on its orientation (this is the same as if the plain geometry method was selected in the top portion of the dialog box), a floor, roof face, or wall. Alternatively, select Ignore to leave the item in the list, but not import elements of that particular material or residing on that layer. Click OK to close the Select Geometry dialog box and update the mapping list.

The mapping list is saved after import, so that several files with the same mapping criteria can be imported sequentially. To remove a material or layer from the list prior to importing, select it and click Remove. To clear all items from the list, click Remove All. Selecting Remove All is a quick way to clear the list prior to specifying new mapping criteria.

8.	Repeat steps 6 and 7 until all desired materials or layers are mapped to a geometry type.

9.	Click OK; the Import SketchUp Model dialog box opens. Select the file to import, and click Open.

10.	SketchUp geometry and components are imported as specified, and are automatically selected. The Resource Browser is populated with the converted 3D symbols.

Items are imported at a 1:1 scale. It may be helpful to click Fit to Objects on the View bar to zoom to fit the objects in the drawing. It may also be helpful to adjust the layer scale at this time.